#5104
Steel Channel Trim
used as closure strip at edges of greenscreen^® panels - recommended on panel edges adjacent to pedestrian traffic or where edge reinforcement for plant maintenence is desired
Materials:20 gauge galvanized steel
Size: 1/2" leg x 3 1/8" wide x 1/2" leg
Finish: powder coated to match panel color

#5105
Steel Edge Trim
used as closure strip at edges of greenscreen^® panels - recommended on panel edges adjacent to pedestrian traffic or where edge reinforcement for plant maintenence is desired
Materials: 20 gauge galvanized steel
Size: 1/2" leg x 1/2" leg
Finish: powder coated to match panel color

#5132A
Adjustable Wide
Mounting Clip
used as a flush mounting clip for wall hung greenscreen^® panels- clip provides full depth panel support for uplift and downloading
Materials: 10 and 14 gauge galvanized steel.
Size: 1 1/2" wide x 3" tall with 1/4" diameter hole. Adjustable from 3" to 4 1/2". Two pieces.
Finish: powder coated to match panel color

#5132V
Adjustable Mounting Clip
for column trellises, wall hung or steel mounted greenscreen^® panels, or to hold panels off the surface. Clip provides full depth panel support for uplift and downloading
Materials: 10 and 14 gauge galvanized steel.
Size: 1 1/2" wide x 2" tall x 6” length with 1/4" diameter hole. Adjustable to hold screen from 3" to 4 1/2" from structure. Two pieces.
Finish: powder coated to match panel color

#5145
Post Clip
For use with free standing greenscreen^® panels mounted to 3" steel or wood post . Use as a pair on front and back face of screen.
Materials: 10 gauge galvanized steel.
Size: 1 3/4" wide x 5" with slotted 1/4" diameter hole.
Finish: powder coated to match panel color

#5141
"C" Clip.
Used on panels with Channel or Edge Trim to hold screen edge to a vertical wall, column or post, or to attach screen bottom edge to a horizontal slab or beam, or used as a pair to join flat or curved screens at a horizontal joint.
Materials: 14 gauge galvanized steel.
Size: 1/2" leg x 3 1/4" x 1/2" leg x 1 3/4" wide.
Finish: powder coated to match panel color

#5133
Snap Clip
used for mounting panels in freestanding, flush applications - snaps onto top, bottom or sides of panels (with no trim) and is field screwed to structural supports. Requires access to front side of panel only for installation and has maximum span of 48".
Materials: 10 gauge galvanized steel.
Size: 1 3/4" x 3" x 3" with 1/4" x 1" slot.
Finish: powder coated to match panel color

#5159
Standoff Bracket
Recommended for use as a mounting bracket for wall hung greenscreen^® panels to support screens held off the wall surface a maximum of 18".
Materials: 10 and 14 gauge galvanized steel
Size: 1.5" wide x 6 1/4" tall x 17” length with two 1/4" dia. hole.
Finish: powder coated to match panel color

#5112
Utility Clip
used as a flush mounting clip for wall hung greenscreen^® panels. Primarily for applications with single panel height.
Materials: 14 gauge galvanized steel
Size: 1 3/4" wide x 2.5" tall -
with (1) 1/4" hole
Finish: powder coated to match panel color

#5113
Mounting clip
used as a flush or spaced mounting clip for wall hung greenscreen^® panels - clips may be rotated 180 to mount panels 5/8" away from wall. Primarily for applications with single panel height.
Materials: 16 gauge galvanized steel
Size: 1.75" wide x 2.5" tall with 3/16"
Finish: powder coated to match panel color

Steel Posts
Used for free standing modular screens and fences. Available square or round in 1" incremental length.
Material: Steel. Square has 3/16" wall, round is ASTM A-500.
Size: 3" square or 3" diameter round.
Finish: powder coated to match panel color

Post Caps
Available to fit round or square posts.

Material: Round cap is die cast steel. Square is 16 gauge stamped steel.
Size: Round cap is 3 1/2" diameter o.d., square is 3 1/4" x 3 1/4."
Finish: powder coated to match panel color

#5134
Free Standing Concrete Anchors
used for mounting greenscreen^® single modular panels to 6’ height at freestanding applications - bolt to panel edge with backing plate and imbed in concrete footing
Materials: 14 gauge galvanized steel
Size: 3 1/4" wide x 42" long with (5) 3/8” dia. holes
Finish: powder coated to match panel color

#5135
Planter Straps
used for mounting standard 4' wide greenscreen^® panels to custom planter - bolt straps to side of planter then bolt to edge of panel with backing plate
Materials: 10 guage galvanized steel
Size: 3" wide x 32" long x 1/8” thick with (4) 1/4” diameter holes
Finish: powder coated to match panel color

#5136
Spacer
used with mounting clips to provide a clear space between the clip and mounting surface / structure
Materials: UHMW High density, non UV degradeable plastic.
Size: .5" thick x 1.5" diameter with 7/16” dia. hole
Color: black

#5142
Spacer
Used for spacing mounting clips away from wall or floor surface.
Materials: UHMW High density, non UV degradeable plastic.
Size: 1/2" thick x 2 5/8" x 1 3/4" with 7/16" dia. hole.
Color: black

#5130
Cage Assembly Clip
used for factory joining greenscreen^® panels together edge to edge (without trim) can be factory or field applied
Materials: 20 gauge steel
Size: approximately 1/4" diameter x 7/16" tall
Finish: galvanized

#5131
Flex "C" Ring
used for "in-field" joining greenscreen^® panels together edge to edge (without trim) can be factory or field applied
Materials: 16 gauge steel
Size: approximately 5/16" diameter
Finish: galvanized